Issue capturing the drivers for the HP Elite Pad 1000 G2
trying to capture the drivers for the HP elite Pad 1000 g2 but when accessing the k2000 driver feed discovery tool it constantly comes back with a permission denied...is there a better method than running that vb script to upload the driver pack for this pad to the k2000?
0 Comments
[ + ] Show comments
Answers (1)
Answer Summary:
Please log in to answer
Posted by:
TheAustinDave
9 years ago
Top Answer
Hello,
What version of the K2000 appliance is currently installed - is it 3.7?
If so I would recommend copying the entire contents of the \\ikbox\drivers_postinstall\feed_tools to the \\ikbox\petemp directory. When you PXE boot a system you can then access with the Recovery>Command Prompt and select the t: drive. This t: drive is the mapped \\ikbox\petemp directory and you can then run the driver_feed_discovery_tool from the directory.
Another option would be to use the driver_feed_builder tool which when run on a system will obtain all the needed information and then create the post install directories. It would also create a back-up of the drivers and place them into the correct model folder.
TheAustinDave
What version of the K2000 appliance is currently installed - is it 3.7?
If so I would recommend copying the entire contents of the \\ikbox\drivers_postinstall\feed_tools to the \\ikbox\petemp directory. When you PXE boot a system you can then access with the Recovery>Command Prompt and select the t: drive. This t: drive is the mapped \\ikbox\petemp directory and you can then run the driver_feed_discovery_tool from the directory.
Another option would be to use the driver_feed_builder tool which when run on a system will obtain all the needed information and then create the post install directories. It would also create a back-up of the drivers and place them into the correct model folder.
TheAustinDave
