KBE UI - not working on E6320
Hi,
Just got the K2000 up and running.
Got all the drivers in for the E6320 and the latest KBE driver pack and A05 drivers for Windows PE from Dell, but when booting into a 32bit KBE, the system freezes and wont let me go any further.
Oddly the 64bit version works - but it does not display any scripted installs!
I did force a boot action so that the scripted install process kicks off straight away after PXE booting though and that's worked a treat.
Its just the KBE front end that is frozen and the HDD light flashes on and off repeatedly.
PXE booting into a VMWARE VM works fine though.
Cheers in advance,
Siomon
Just got the K2000 up and running.
Got all the drivers in for the E6320 and the latest KBE driver pack and A05 drivers for Windows PE from Dell, but when booting into a 32bit KBE, the system freezes and wont let me go any further.
Oddly the 64bit version works - but it does not display any scripted installs!
I did force a boot action so that the scripted install process kicks off straight away after PXE booting though and that's worked a treat.
Its just the KBE front end that is frozen and the HDD light flashes on and off repeatedly.
PXE booting into a VMWARE VM works fine though.
Cheers in advance,
Siomon
0 Comments
[ + ] Show comments
Answers (6)
Please log in to answer
Posted by:
cserrins
13 years ago
sibod,
Where does it "freeze" is it at a command prompt? If so, do an ipconfig to see if you have an IP address. These laptops use the e1c driver, so confirm that you have that driver in there. After putting the driver in there, recaching, did you build a new KBE? That is required for the driver to be injected.
Corey
Where does it "freeze" is it at a command prompt? If so, do an ipconfig to see if you have an IP address. These laptops use the e1c driver, so confirm that you have that driver in there. After putting the driver in there, recaching, did you build a new KBE? That is required for the driver to be injected.
Corey
Posted by:
RandomITPro
13 years ago
The 64bit loading but not the 32bit has me suspicous esp after you said you got the latest drivers. The same thing happened to me the KBE would stop loading at a seemingly random spot. Turns out I didn't have enough RAM in these systems. 512 mb isnt enough. I would check that. However your E6320 should have like 2 gb at least, so this probably isn't your issue. Take a screen shot please.
Posted by:
sibod
13 years ago
Hi,
I'm getting to the main screen with the options to deploy an image, recover, hardware inventory - but the hard drive activity light is flashing constantly and I cannot move the mouse whatsoever.
It is doing it in the 64bit version of KBE after rebuilding with the newer drivers that support the E6x20 series laptops from Dell.
It doesnt do this when testing under VMWare.
Cheers,
Simon
I'm getting to the main screen with the options to deploy an image, recover, hardware inventory - but the hard drive activity light is flashing constantly and I cannot move the mouse whatsoever.
It is doing it in the 64bit version of KBE after rebuilding with the newer drivers that support the E6x20 series laptops from Dell.
It doesnt do this when testing under VMWare.
Cheers,
Simon
Posted by:
RandomITPro
13 years ago
Posted by:
cserrins
13 years ago
Posted by:
RandomITPro
13 years ago
Rating comments in this legacy AppDeploy message board thread won't reorder them,
so that the conversation will remain readable.
so that the conversation will remain readable.