/build/static/layout/Breadcrumb_cap_w.png

EPSON EasyMP Network Projection

Version: 2

Don't be a Stranger!

Sign up today to participate, stay informed, earn points and establish a reputation for yourself!

Sign up! or login
Views: 39.4k  |  Created: 02/05/2010

Average Rating: 0
EasyMP Network Projection has 4 inventory records, 1 Questions, 0 Blogs and 1 links. Please help add to this by sharing more!

Deployment Tips (5)

Most Common Setup Type
Windows Installer (Delivered as an EXE)
Average Package Difficulty Rating
Rated 3 / 5 (Average) based on 3 ratings
Most Commonly Reported Deployment Method
Vendor Provided Command Line (switch driven)
2
Command Line
This is valid for V. 2.8.6 . It took me around 2 Days to figure this out, but know everything is working fine.

How To silent install:
1. Download easyMP Network Projection: https://ftp.epson.com/drivers/epson16189.exe

2. Extract the downloaded .exe (with 7-Zip for example) and you will get a second .exe, extract this one also and you will get 2 folders(InstData and Language)

3.  Open InstData and go into "license" Folder. From there copy the desired language into InstData and after that delete the license folder 
Warning: If you do not delete the license Folder you will end up with a License Agreement Pop-Up during Silent Installation)

4. Create setup.iss (InstData\setup.exe /r f1C:\temp\install.iss)  
Warning: Always run cmd as Admin or you don't have all needed entries in your install.iss File)

5. How To Silent-Install: InstData\setup.exe /s install.iss
Warning: install.iss has to be in the same folder as setup.exe, Full Path to the iss File won't work with /s (try instead /s f1<path>)

The Uninstall-Part is a bit more complex. First of all read the Inventory Records for EasyMP Network Projection then do the following:
1. Move to C:\Program Files (x86)\InstallShield Installation Information\ . There you will find a Folder for each installed InstallShield-Exe. Locate the folder for easy MP Network Projection (the files in the folder will be the exactly same as in instData when you run the installation).

2. Copy the following command and change the Path to be correct for you:
"C:\Program Files (x86)\InstallShield Installation Information\{4A515955-A3D4-4FE6-98C0-E7987FF3279A}\setup.exe" -runfromtemp -l0x0407 -removeonly "C:\Program Files (x86)\InstallShield Installation Information\{4A515955-A3D4-4FE6-98C0-E7987FF3279A}\setup.exe" -runfr  /r f1c:\temp\uninstall.iss

3. Run the above command and you will get a working uninstall.iss for silent uninstall.

4. How To Silent-Uninstall:
"C:\Program Files (x86)\InstallShield Installation Information\{4A515955-A3D4-4FE6-98C0-E7987FF3279A}\setup.exe" -runfromtemp -l0x0407 -removeonly "C:\Program Files (x86)\InstallShield Installation Information\{4A515955-A3D4-4FE6-98C0-E7987FF3279A}\setup.exe" -runfr /s uninstall.iss
Warning: This will cause an automatic reboot when uninstall is finished (no prompt etc)
Note: Again the uninstall.iss File has to be in the same Folder as setup.exe(try to use /f1 instead). 

I don't know why you can't do the Steps for Silent-Uninstall with the setup.exe used for installation. I've tried it, but ended up alyways with a -3 Error (Required Data not found in the uninstall.iss file).
Setup Information:
Setup Type: Windows Installer (Delivered as an EXE)
Deployment Method Used: Vendor Provided Command Line (answer file driven)
Deployment Difficulty: Average
Platform(s): Windows
  • SaintCore
  • 10/21/2014  
  • Show Comments   ( 2 )

  • AF JustinKS is spot on with the installation instructions & .ini settings. To get your own silent installer from Epson, email Epson Customer Support (epson1@mailca.custhelp.com) & simply request it. They sent me the download link within 24 hours. It works great!

    In addition to modifying the nscsettings.ini file, I actually wrote a small batch file that ran the installer, waited (because the installer calls other executables), then ran a quick little .vbs script to pin the EasyMP shortcut to the taskbar.

    Zipped the modified ini & new batch file along with all the other contents of the "Perfect Silent" folder (from Epson's original that you'll download link: NSCV286Win_PerfectSilent.zip), uploaded to K1000 EasyMP 2.86 inventory, then made a Managed Installation that overwrites the default installation (so I could use my .bat file) & deletes downloaded files. - cmgreene 9 years ago
  • Confirming I got this to work in 2019, with SCCM 2016. Same instructions for EasyMP 2.87 - tim42 5 years ago
1
Command Line
I spoke to Epson about this and they provide a totally separate installer for silent installs.  they do not provide an msi, but I thought people might be interested in the document that comes with teh silent installer (ENP286Win_Silent)

 

 

 

[Method to change the mask image] The features and options of silent installation version
The features of the silent installation version:
The silent installation version does not display any messages while this software is installed to PC.
ü A message does not appear when the installing is completed.
ü The PC is rebooted without a message when user updates this software from previous version and PC requires a restart.
User can specify the massage and behavior of installation as installation option as follows.

Installation’s Options
User specifies the following options.
Format:
>EMP_NSCInstSilent.exe /xxxxx


Installation Options
Parameters Descriptions
/ep_reboot PC is rebooted when user wants to reboot after the installation is completed.
/ep_disp_end The completed message is displayed on a screen when the installation is completed.
/ep_disp_restart The message to reboot a PC is displayed on a screen when user updates the software from previous version.

Options of initial settings:
User can specify the initial setting by specifying the following values in “nscsettings.ini”. The “nscsettings,ini” is in “InstData” folder.

Initial settings
Section name Key name Key value and descriptions
[initialize] StartNICType [Features]
Specify the initial network adaptors that user uses when starting EasyMP Network Projection.

[Value]
0: Not specify the network adaptor automatically. (User specifies the network adaptor manually when user starts EasyMP Network Projection.
1: Specify the used network adaptor automatically.
2: Specify the wireless network adaptor automatically when user starts EasyMP Network Projection.
3: Specify the wired network adaptor automatically when user starts EasyMP Network Projection.

Default settings: 0


StartMode [Features]
Specify the start mode of EasyMP Network Projection

[Value]
0: Select the start mode when user starts EasyMP Network Projection
1: Specify Quick Connection mode when user starts EasyMP Network Projection
2: Specify Advanced Connection mode when user starts EasyMP Network Projection

Default: 0
StartSearchType [Features]
Specify the search mode when user starts EasyMP Network Projection.

[Values]
0:EasyMP Network Projection searches projectors by “Automatic Search”
1: Select the search mode when user starts EasyMP Network Projection.
2: EasyMP Network Projection searches projectors by what user used last time.

Default: 0
FullScreenMovie [Features]
Enable “full-screen video transfer” mode ON/OFF.

[Values]
0: Disable “full-screen video transfer”
1: Enable “full-screen video transfer”

Default: 1
InstallVirtualDisplay [Features]
Enable / Disable EPSON Virtual Display function.

[Values]
0: No install “Add/Remove EPSON Virtual Display” to PC.
1: Install “Add/Remove EPSON Virtual Display” to PC.

Default: 1
InstallVirtualDisplayNum [Features]
Specify the number of installing EPSON Virtual Display .
(User can use this option when “InstallVirtualDisplay” Key is set to 1.)

0: No install EPSON Virtual Display
1: Install one EPSON Virtual Display to PC
2: Install two EPSON Virtual Displays to PC
3: Install three EPSON Virtual Displays to PC
4: Install four EPSON Virtual Displays to PC

Default : 1

A example of “nscsettings.ini”:
[initialize]
StartNICType=0
StartMode=2
StartSearchType=1
FullScreenMovie=1
InstallVirtualDisplay=1
InstallVirtualDisplayNum=2

Select the mask image in “Presentation mode”
The mask image is displayed on a screen when user select “presentation mode” and Slide Show is not playing.
User can specify the used image by the following setting.

1. Prepare the image file (.jpg) you want to use
2. Rename the prepared file “Image.jpg”.
3. Save “iage.jpg” file in “InstData”.
4. Execute EMP_NSCInstSilent.exe

(Notice!!)
The file name should be “image.jpg”. If the name of the put file is different from “image.jpg”, the put file “image.jpg” is not installed to PC.

Install the used profile
User can install the used profile by the following operation.

[Method to install the used profile]
1. Export profile files
2. Rename the profile “Profile_e.plist” and “Profile_s.plist”. “Profile_e.plist” is for Quick connection mode. And “Profile_s.plist” is for Advanced connection mode.
3. Save “Profile_e.plist” and “Profile_s.plist” in “InstData” folder.
4. Execute EMP_NSCInstSilent.exe

(Notice!!)
The file name should be the same as original file “Profile_e.plist” and “Profile_s.plist”.
If the names of the put files are different from “Profile_e.plist” and “Profile_s.plist”, the profiles files are not installed to PC.

After user install EasyMP Network Projection, “Profile_e.plist” and “Profile_s.plist” files are saved in the following folders. When user uninstalls EasyMP Network Projection, these files are not removed from the following folder.
User needs to delete these files from the following folder is necessary.

[Saved folder]
WindowsXP
（System）:\Documents and Settings\All Users\Application Data\SEIKO EPSON CORPORATION\EMP NS Connection

WindowsVista
（System）:\ProgramData\SEIKO EPSON CORPORATION\EMP NS Connection

Windows7
（System）:\ProgramData\SEIKO EPSON CORPORATION\EMP NS Connection
Setup Information:
Setup Type: Windows Installer (Delivered as an EXE)
Deployment Method Used: Vendor Provided Command Line (switch driven)
Deployment Difficulty: Average
Platform(s): Windows

  • Thanks so much for listing the ini settings! In past versions I had to write a Powershell script to modify the registry settings! You made it soooo much easier.

    For anyone looking to get your own silent installer from Epson, email Epson Customer Support (epson1@mailca.custhelp.com) & simply request it. They sent me the download link within 24 hours. It works great! - cmgreene 9 years ago
  • I just emailed epson too. I hope they send me the file as this will save me the headache of having to install this by hand on like 100+ computers for all our projectors in our classrooms. If a newer version becomes available is there an upgrade path? Like is it possible to just install the updated version over the current version? I hope so. I do not even really care about the profiles all that much as teachers can grab the IP of the projector and set that up again. - bwilkerson 9 years ago
  • I want to add that this install works flawlessly and even upgrades old versions (at least it did when I tested upgrading versions 2.7x or higher)

    Anyone got any tips for adding the firewall exception? I tried using netsh advfirewall firewall add program and that adds the correct information but when the program is launched it still prompts to add the exception to the firewall and will not go away. It is kind of a pain in the butt since our users are not admins so they cannot add the exception - bwilkerson 9 years ago
    • yeah, we have the same problem. I've told our users to just ignore the prompt - they can click "No" and it shouldn't pop up again. this will not prevent the program from working properly either. - AFJustinKS 9 years ago
      • It is annoying. For some users hitting NO does not make it go away.. Not sure why.. Then they freak out when they see the prompt. I was hoping to suppress it somehow. - bwilkerson 9 years ago
0
Script
To suppress the prompt asking for firewall exceptions to be created, you must create Windows Firewall rules locally, not via Group Policy. The software does not correctly check for the presence of firewall rules created via GPO*.

I used the following PowerShell script on Windows 8.1 x64 to create inbound and outbound rules. Replace %ProgramFiles(x86)% with %ProgramFiles% if you are installing on 32-bit Windows. Once this script was run, EasyMP no longer prompted to create rules at startup.

New-NetFirewallRule -Direction Inbound -DisplayName "EasyMP Network Projection" -Program "%ProgramFiles(x86)%\EPSON Projector\EasyMP Network Projection V2\EMP_NSC.exe" -Action Allow -EdgeTraversalPolicy Allow
New-NetFirewallRule -Direction Outbound -DisplayName "EasyMP Network Projection" -Program "%ProgramFiles(x86)%\EPSON Projector\EasyMP Network Projection V2\EMP_NSC.exe" -Action Allow

* This is probably due to it only checking for rules under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules, whereas GPO firewall rules are defined in HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\WindowsFirewall\FirewallRules
Setup Information:
Setup Type: Legacy Setup with command line support
Deployment Method Used: Vendor Provided Command Line (answer file driven)
Deployment Difficulty: unspecified
Platform(s): Windows
  • Trelfar
  • 11/11/2015  
  • Show Comments   ( 1 )

  • I'd like to suppress the initial dialog box that asks for Connect Mode (Quick/Advanced) and sets the default. In our building, if they select the wrong choice (Quick - which seems to make sense, who wants Advanced??) they are in for a world of hurt. Does not seem to be stored in the Registry. Will keep looking... - tim42 5 years ago
0
Note
Some modification has been done in previous and it worked for me with batch file. No uninstall.iss require for uninstall.

Note : If other version or same version is already installed then setup will uninstall it first and reboot is must require before installation.
The uninstall command will not run silently and user interaction is require. So to avoid this situation and install latest version without reboot follow below steps

How To silent install:
1. Download easyMP Network Projection: https://ftp.epson.com/drivers/epson16189.exe

2. Extract the downloaded .exe (with 7-Zip for example) and you will get a second .exe, extract this one also and you will get 2 folders(InstData and Language)

3.  Open InstData and go into "license" Folder. From there copy the desired language into InstData and after that delete the license folder 
Warning: If you do not delete the license Folder you will end up with a License Agreement Pop-Up during Silent Installation)

4. Create setup.iss (InstData\setup.exe /r f1C:\temp\install.iss)  
Warning: Always run cmd as Admin or you don't have all needed entries in your install.iss File) Copy install.iss and paste into InstData folder

5. How To Silent-Install: \InstData\setup.exe -s -f1\InstData\install.iss
Warning: install.iss has to be in the same folder as setup.exe

The batch file will look like this: (Without reboot latest version will install )
if exist "%ProgramFiles(x86)%\EPSON Projector" rd /s /q "%ProgramFiles(x86)%\EPSON Projector"
if exist "%ProgramFiles%\EPSON Projector" rd /s /q "%ProgramFiles%\EPSON Projector"
if exist "%ProgramData%\SEIKO EPSON CORPORATION" rd /s /q "%ProgramData%\SEIKO EPSON CORPORATION"
if exist "%commonprogramfiles(x86)%EPSON Projector" rd /s /q "%commonprogramfiles(x86)%EPSON Projector"
if exist "%commonprogramfiles%EPSON Projector" rd /s /q "%commonprogramfiles%EPSON Projector"
if exist "%ProgramFiles(x86)%\InstallShield Installation Information\{4A515955-A3D4-4FE6-98C0-E7987FF3279A}" rd /s /q "%ProgramFiles(x86)%\InstallShield Installation Information\{4A515955-A3D4-4FE6-98C0-E7987FF3279A}"
if exist "%ProgramData%\Microsoft\Windows\Start Menu\Programs\EPSON Projector" rd /s /q "%ProgramData%\Microsoft\Windows\Start Menu\Programs\EPSON Projector"
reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SEIKO EPSON CORPORATION" /f
reg delete "HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SEIKO EPSON CORPORATION" /f

:: Start of Installation
::Installation path
....\InstData\setup.exe -s -f1....\InstData\install.iss

::END
Setup Information:
Setup Type: Windows Installer (Delivered as an EXE)
Deployment Method Used: Vendor Provided Command Line (switch driven)
Deployment Difficulty: Average
Platform(s): Windows

Inventory Records (4)

View inventory records anonymously contributed by opt-in users of the K1000 Systems Management Appliance.

EasyMP Network Projection

Version

2.7.6.0

Uninstall String

"C:\Program Files\InstallShield Installation Information\{4A515955-A3D4-4FE6-98C0-E7987FF3279A}\setup.exe" -runfromtemp -l0x0407 -removeonly "C:\Program Files\InstallShield Installation Information\{4A515955-A3D4-4FE6-98C0-E7987FF3279A}\setup.exe" -runfr

Questions & Answers (1)

Questions & Answers related to EPSON EasyMP Network Projection

11
ANSWERS
Epson Easy MP Installshield exe file problem
By: orlith 12 years ago 15.2k views
Nawdiral commented 7 years ago

Blogs (0)

Blog posts related to EPSON EasyMP Network Projection

Reviews (0)

Reviews related to EPSON EasyMP Network Projection

 
This website uses cookies. By continuing to use this site and/or clicking the "Accept" button you are providing consent Quest Software and its affiliates do NOT sell the Personal Data you provide to us either when you register on our websites or when you do business with us. For more information about our Privacy Policy and our data protection efforts, please visit GDPR-HQ