Summary: You find that you are having trouble PXE booting to the K2000 appliance and you use Novell for DHCP
Solution:
1 - Remove the option 66 and 67 for Novell DHCP settings
2 - Then using the Novell DNS/DHCP tool, go to a DHCP scope, click on the "Subnet Options" tab, then place a check mark on the "Set Boot Parameter Option" check mark box.
3 - Then type in <IP of KBOX> of in the "Server Address" field
4 - Then type "k2000.0" in the "Boot File Name" field
5 - Restart the DHCP service
1. Remove DHCP option 60 if it exists.
2. Remove DHCP options 66 and 67 if they exist.
3. Using iManager:
Under DHCP, select 'Subnet Management'
Select View/Modify Subnet
Select the subnet you want to configure
Select Next to go to the next page
Select 'Enable' under 'Boot Parameter Options:'
Fill in Server Address, Server Name, and Boot File Name
Select 'Next', then 'Done'
Or,
Using the 'DNS/DHCP Management Console':
Select the subnet you are trying to configure
Select the 'Subnet Options' tab
Check the 'Set Boot Parameter Option' checkbox
Fill in 'Server Address:', 'Server Name:', and 'Boot File Name:'
4. Shutdown and restart DHCP
In our environment the AUTOEXEC.NCF file called the ZfDStart.ncf that in turn called pxeStart.ncf. You should be able to comment out the call to pxeStart.ncf. It starts tftp.nlm, pdhcp.nlm, and dts.nlm. If you are not using ZENworks preboot services or ZENworks imaging services you should not need these nlms anymore. There may be more ZENworks related services that you can shut down, but that depends on your configuration and how you use it.
Netware 6.5 Service Pack 6
ZENworks for Desktops 4.01
DHCP server 3.14-0 - jbishop 12 years ago