KBE10 x64 unable to "see" hard drive
I am trying to build a new KBE for Windows 10 to use with Lenovo X1 Carbon Gen 5 and Lenovo M800. When I boot off the new KBE and attempt to capture image the Image Source field is empty. I assume it is an issue of missing drivers for the hard drives. I have run the Driver Feed Builder and added some of the drivers to the KBE. I must be missing the correct drivers or some simple step. Also, I am re-caching drivers before building the KBE. I have version 3.7.120345 server.
5 Comments
[ + ] Show comments
Answers (1)
Please log in to answer
Posted by:
Nico_K
7 years ago
this looks like a driver is missing.
The first step would be:
Build a new KBE with the latest driver pack:
https://support.quest.com/kb/124396
If this does not help you need to inject the correct driver (the X1 uses a bunch of possible drives, NVMe (which is not an issue with W10), normal SSD (also no issue by default) and OPAL2 devices over NVMe which may be an issue without the correct driver.
The first step would be:
Build a new KBE with the latest driver pack:
https://support.quest.com/kb/124396
If this does not help you need to inject the correct driver (the X1 uses a bunch of possible drives, NVMe (which is not an issue with W10), normal SSD (also no issue by default) and OPAL2 devices over NVMe which may be an issue without the correct driver.
Comments:
-
Sorry for the delayed response. I added what I believe are the correct Samsung NVMe drivers and the KBE boot stops right when the blue Windows icon appears. - rrichter@sog.unc.edu 7 years ago
-
I think I figured it out. - rrichter@sog.unc.edu 7 years ago
Also, I would like to know what folders do you have in your \\K2000\drivers\kbe_x64\ folder?
There make sure you ONLY have the Network and the Storage folders from the PE10 driver pack.
If not then re-arrange, recache all drivers and try to build a new KBE - Channeler 7 years ago